NOKIA DEAD PHONE FLASHING via Phoenix -- TUTORIAL INSIDE!

[kiam]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

@kiam
baka di na phoenix sagot sa prob mo?what ba nangyari dyan before?

Kasi sir yung phone ko pag e.on ang nangyayari lumalabas ung NOKIA sign tapos nag.papakita yung Set Date pero after 2 seconds mag.wa white screen tapos nag.off pero pag.pindot ko sa keypad..white screen ulit.. den off...pindot ko ulit 2 beses ganun parin after off na talaga... yun wala na... ganon nlang palagi.. pag.e.o.on ko...

hmm... sana po mka kayu.....

 

[cherrymae24]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

@kiam, na-try mo ng ireformat? Gamit yung call button+3+*

 

[zhinichii]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

mga master po...
flinash ko ung nokia 7210c supernova ko gamit ung phoenix succesful nmn ung pag flash ko... pero lage pring ngrrestart ung cp ko...bigla nlng ngrrestart
ano kayang prob nito?..

 

[kiam]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

WORKING NA PO... THANK YOU TO ALL....)

 

[raypzt]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

@kiam
congratz!

mga master po...
flinash ko ung nokia 7210c supernova ko gamit ung phoenix succesful nmn ung pag flash ko... pero lage pring ngrrestart ung cp ko...bigla nlng ngrrestart
ano kayang prob nito?..

hindi ba nagrerestart yan ng ganyan before mo iflash?o dead phone siya dati?may possibilty na hardware na yan.

 

[thick09]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

ts yung sakin tinry ko tapos nagerror tapos nung tinry ko ulit nagdidisconnect na ang phone pano ba magandang gawin?

 

[zhinichii]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

hindi ba nagrerestart yan ng ganyan before mo iflash?o dead phone siya dati?may possibilty na hardware na yan.

bgo ko po to iflash ang sira talga nito ung "not enough memory" ngagamit ko pnmn sya maliban lang sa music player.. mga ilang araw bigla nlng ngloko ung power button ayaw mgopen tpos di ko xa gnmit mga ilang araw nung pagopen ko bumukas na xa pero hndi sa power button ngoopen pg nlalagay lang ung battery bigla nlng mgoopen.. ngaun naman ayaw ng mgcharge ayaw ng mgopen
ano po kayang prob nito sir po

 

[raypzt]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

@thick
anong error lumalabas?

@zhiniichi
what ba unit mo?7210c o 7210 super nova?i think super nova yan.sirain talaga ang super nova in terms of software lalo yang music player.try mo na lang iflash ulit sa ibang firmware version higher sa current version mo.

 

[marlren23]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

try ko to sa n70 ko white screen lang pag inoopen

 

[sicnarf007]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

boss kaya ba nito maayos 6120c nasira ng pinaayos ko nagshort siguro kaya palitan na ng mother board

 

[ansai08]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

buhay na ulit cp ko kaso may prob nanaman..
unknown imei daw..
hehehe!

 

[raypzt]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

boss kaya ba nito maayos 6120c nasira ng pinaayos ko nagshort siguro kaya palitan na ng mother board

software lang naaayos ng phoenix,pag hardware related prob di niya maaayos.

 

[Fraser]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Loading flashing files...
Opening RAW connection...
Waiting for USB device...
--- Press phone's power button! ---
Connection opened to BootCode successfully
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 308032 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Loading flashing files...
Loading flashing files...
Asic CMT: Start programming 36591 KB...
Asic CMT: Erasing rm495__07.95.mcusw
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing area 6...
Asic CMT: Erasing rm495__07.95.ppm_t
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm495__07.95.image_t_ph_red
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Programming rm495__07.95.mcusw
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming rm495__07.95.ppm_t
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming rm495__07.95.image_t_ph_red
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x84009427 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing

TS, 5130c-2 yung cp ko. Tapos ang problema is yung contact service. HELP NAMAN PO @_@

SAME problem po ako nito and im using N5320. Sinunod ko naman yung instruction ni TS kaso ayan nga, ganito din error ko..

Ano po kayang solusyon dito? in advance

Yung JAF po ba compatible sya sa USB cable lang?

 

[raypzt]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

@lawrence
yup yung jaf pwedeng usb lang search google.bout sa prob mo natry mo na ba gumamit ng latest version ng phoenix?

 

[Fraser]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

@lawrence
yup yung jaf pwedeng usb lang search google.bout sa prob mo natry mo na ba gumamit ng latest version ng phoenix?

salamat sa reply brad.. hindi ko pa nata-try yung latest version, may nakita ko dito sa thread kaso dead link na.. baka may mediafire link ka dyan brad? salamat!

 

[raypzt]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

@lawrence
pasensya na wala e?google mo na lang or search ka dito sa symb.

 

[Fraser]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

@lawrence
pasensya na wala e?google mo na lang or search ka dito sa symb.

sige salamat ng marami!

 

[raypzt]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

^

 

[Quilizapperz15]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

mga boss pwewde bang mabuhay nokia 5220xm ko.. contact service lang kc sya mga boss. pinatingnan ko sa kaibigan kong technician di na maditech yung imei nya kaya kahit ano flash daw nito di daw mabubuhay... dati sya nag flaflsah nito ok pa. lagi kc syang nababagsak eh. salamat sa tutulong.

 

[zhinichii]

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

what ba unit mo?7210c o 7210 super nova?i think super nova yan.sirain talaga ang super nova in terms of software lalo yang music player.try mo na lang iflash ulit sa ibang firmware version higher sa current version mo.

7210c ang nkalagay sa likod ng cp ko pero sa software 7210 supernova lng.. gnon po ba tlga ang supernova.. ngaun po kc ok nnmn xa ok nrin ung power button nya.. under observation p xa.. post ko dito kung anong mangyayari kung sakali..
sir raypzt